Jeepfan.com
serving the Jeep community since 1997
In 2013 Jeep released a special model Rubicon to celebrate the 10th anniversary of the model. This model had extra features including steel front and rear bumpers, a first for the JK. If you own a JK Wrangler that is a 10th Anniversary (2013), Rubicon X (2014), or Rubicon Hard Rock (2015-2017) running the stock …
As part of the return from retirement of the jeepfan.com 1978 CJ-5 was outfitted with several new items to improve its off road prowess. A winch on the front of a Jeep is as useful as it looks good, our Jeep spent several years with a naked bumper and it was time for a change. Over …
If you live in an area that experiences the force of winter it may be time for a new set of wiper blades to keep the window clear when the messy stuff arrives. Snow is bad enough but dirty slush and ice coat a Jeep’s windshield in no time and even the JK has less …
Continuing on from the HD Hinged Carrier installation part of our $3K JK we are now at the point of installing the Teraflex Adjustable Tire Mount. There are a few options here and depending on your installation you may need to proceed differently. Both kits come with a few spacers that are used in different applications. …
First a bit of review of our $3K JK Project and where we have been. We installed a lift, wheel spacers, and 35″ tires on the Jeep and our next step is getting the 35″ spare mounted properly to the back of the Jeep. A 35″ may fit on the stock carrier depending on the wheel but without …
After installing the Barricade Trail Force HD Front bumper on the jeepfan.com JK we knew the rear would be in the Jeep’s future. We chose the Barricade Trail Force HD Rear Bumper to match and the bumper didn’t disappoint. The bumper comes in two versions one with a tire carrier and one without. Since we have …
After installing the Barricade Trail Force HD Bumper on the jeepfan.com JK we knew a winch needed to go on to fill the spot in the center of the bumper. We knew we wanted a 9500lb winch but didn’t want to break the bank, after some research and comparing we decided to go with the …
Continuing on from part 1 – Wiring. We are now at the point of (probably) needing to extend the factory driving light wiring to reach the new light location. We cut the tape and pulled the wires from the wire wrap. Then cut the wires a few inches from the plug and crimped on a …
Looking for a simple and effective way to mount your CB antenna to your JK? Tera Flex makes an inexpensive and simple mount for the JK Wrangler that mounts to the spare tire carrier.
A clever CB antenna mount that hides in the JK license plate mount.
