A Jeepers garage is not complete without a quality welder. The Millermatic 175 is a small, portable welder that offers capabilities and features the home fabricator needs.
Get personalized content recommendations and answers drawn from our website. Simply type your question or topic of interest, and our AI assistant will help you find relevant articles, tips, and insights. You can also have a natural conversation to explore topics in more depth.
The Millermatic 175 Mig Welder is an all-in-one wire welding package welds 24 gauge – 1/4 in (0.8 – 6.4 mm) mild steel.
Millermatic 175 Mig Welder Specs and Features
Infinite voltage control with wire feed speed tracking provides broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted.
Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and calibrated, spring-loaded tension arm designed to make setup easier and faster.
Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires.
“Tip Saver” short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
Built-in solid-state contactor circuit makes wire electrically “cold” until trigger is pulled. Makes unit safer, and is easier to position torch to work before starting weld.
Thermal overload protection shuts down the unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Process
- MIG (GMAW)
- Flux Cored (FCAW) (gas and self-shielded)
Applications
Light Industrial Applications
- Light Fabrication
- Maintenance and Repair
- Auto Body
- Farm and Ranch
- Home
Specifications
Input Power
- Requires 1-Phase Power
- 230 V, 19.5 A, 60 Hz
Rated Output
- 130 A at 20 VDC, 30% Duty Cycle
Welding Amperage Range
- 30 – 175 Amps
Wire Speed
- 20 – 700 IPM (0.5 – 17.8 m/min)
Net Weight
- 73 lb (33 kg)
Comes Complete With
- Power source included
- 10 ft (3 m), M-10 Miller MIG gun and cable assembly #195 605
- 10 ft (3 m) work cable with clamp
- Factory-installed gas solenoid valve
- Regulator and gas hose
- Power cord and plug
- Extra contact tips
- Sample spool of solid wire
- Information/settings chart.
- Set-up and operation video
