Rough Country TJ 2.5″ Lift Kit Install – Part 2
Front Installation – continued It is easier to install the new springs with the sway bar links and lower track bar mount disconnected. This allows the axle to move further and more freely.
lift kit
Rough Country TJ 2.5″ Lift Kit Install
With progressive springs and Rough Country 2.2 Performance shocks Offroading with a TJ is loads of fun, we all know that. A stock TJ is quite capable but a mild lift and larger tires allows more adventure and keeps the underside of the Jeep less abused.
Rough Country TJ 2.5″ Lift Kit Install – Part 4
Skid Plate Spacer Installation Nearing the end of the install the last step is to install the transmission skid plate spacers. Support the plate on a floor jack and remove the three bolts on one side.
General Jeep – A Dukes of Hazzard style YJ
The General Jeep – John Vavra’s YJ Wrangler is modeled after the Dukes of Hazzard General Lee. Sporting bright orange paint and the familiar 00 this Jeep sure gets attention.
BDS 3″ Lift for Wrangler JK Rubicon – Part 5
Lifting a Wrangler JK or TJ will cause the axle to shift to one side due to the increased angle of the front track bar. In the rear adding a drop bracket will correct the angle and place the axle back where it belongs. The front is a different story. The steering drag link and …
BDS 3″ Lift for Wrangler JK Rubicon – Part 4
Installing the Rear Raise the Jeep and support by jack stands under the frame in front of the rear control arm mounts. We also add additional support for the rear of the Jeep with a high lift jack under the rear bumper. Keep the rear axle supported by a floor jack at close to ride …
BDS 3″ Lift for Wrangler JK Rubicon – Part 3
Install the front springs with the spacer inside the spring. Using the fasteners provided attach the bump stop spacers to the spring pad.
BDS 3″ Lift for Wrangler JK Rubicon – Part 2
As with all projects we write about here at jeepfan.com safety is a top priority. Make sure the Jeep is properly secured when supported by something other than on all fours. Use properly rated jack stands. Also, these articles may not lift all the small details involved in an install. Make sure you are capable …
BDS 3″ Lift for Wrangler JK Rubicon
In the early stages of the jeepfan.com JK we installed a 2.5″ Tera Flex Budget Boost lift kit. The kit has served the Jeep well in the year it was installed but it has come time to upgrade to a “real” lift that includes shocks, springs, etc.
Ted’s 2002 Jeep Liberty KJ
This is the first Liberty featured on jeepfan.com. Here’s the details. Specifications ARB Air Lockers Front and rear 245/75 Goodyear MTRs on Jeep Moab Rims 2.5″ Frankenlift from All J Products with Rancho shocks and struts Custom built upper A arms from Jeepin’ by Al Garvin Wilderness Rack with 4 PIAA spot lamps Coming soon, …