Mopar Jeep Wrangler JK Bumper Installation
Harry included a set of Mopar JK Rock Bumpers when he ordered his 2008 JK Wrangler Unlimited. After a few months of taking up basement space we decided to install them.
JK
Installing BDS Caster Adjusting Bolts
After a lift on a Wrangler JK these simple bolts set the caster back where it belongs.
AEV Pintler Wheels and BFG Mud Terrain KM2 Tires
Fresh off the installation of a BDS 3″ lift it seemed time to upgrade the jeepfan.com JK’s tires. Now we have been very happy with the Toyo tires and the factory Moab Rubicon wheels but a change would give us a different perspective of how different tires would work.
BDS 3″ Lift for Wrangler JK Rubicon – Part 5
Lifting a Wrangler JK or TJ will cause the axle to shift to one side due to the increased angle of the front track bar. In the rear adding a drop bracket will correct the angle and place the axle back where it belongs. The front is a different story. The steering drag link and …
BDS 3″ Lift for Wrangler JK Rubicon – Part 4
Installing the Rear Raise the Jeep and support by jack stands under the frame in front of the rear control arm mounts. We also add additional support for the rear of the Jeep with a high lift jack under the rear bumper. Keep the rear axle supported by a floor jack at close to ride …
BDS 3″ Lift for Wrangler JK Rubicon – Part 3
Install the front springs with the spacer inside the spring. Using the fasteners provided attach the bump stop spacers to the spring pad.
BDS 3″ Lift for Wrangler JK Rubicon
In the early stages of the jeepfan.com JK we installed a 2.5″ Tera Flex Budget Boost lift kit. The kit has served the Jeep well in the year it was installed but it has come time to upgrade to a “real” lift that includes shocks, springs, etc.
CoolTech Wrangler JK CB Antenna Mount
A clever CB antenna mount that hides in the JK license plate mount.
Poweraid Throttle Spacer and Airaid Cold Air Intake install – Part 2
Installation Steps and Tips Continued After removing the temp sensor continue by removing the four bolts in the throttle body and pull the throttle body out. Install the spacer then the gasket then using the supplied bolts reinstall the throttle body.
Mopar Rock Rails for Wrangler JK
Adding some side armor to Christine’s JK After dragging her Sahara’s steps over the rocks at Rausch Creek Off Road park Christine decided an upgrade was needed to prevent expensive body damage to her 2007 JK.