Jeep Wrangler JK Squeaky Rear Seat Headrest
Many have commented and we personally have experienced squeaky rear seat headrests. After some investigating we figured out the cause of this annoying issue.
how-to
Jeep Wrangler JK 5 Tire Rotation
Having a Jeep with 5 full size tires means that tire rotation should include the spare. While some Jeep owners choose to leave out the spare in rotation for varying reasons like different size/type tire or thinking it will save the spare from wear. We believe that if your Jeep has a matching spare you …
Jeep Wrangler Pentastar 3.6L Oil Change
The jeepfan.com 2012 Wrangler Rubicon hit 3588 miles and the Change Oil indicator started showing on the instrument cluster after every startup. Time for the first oil change..
Driveline Angles – Part 2
CHECKING DRIVESHAFT ANGLES IN THE VERTICAL OR HORIZONTAL PLANE WARNING: Rotating shafts can be dangerous. You can snag clothes, skin, hair, hands, etc. This can cause serious injury or death. Do not work on a shaft (with or without a guard) when the engine is running Use the following procedure to check driveshaft angles for …
CJ Transmission Swap 5 to 4 Speed
QUESTION: I have a 1983 CJ-7 with a 258 six. It has a T-5 five speed transmission with (I believe) a Dana 300 transfer case. The transmission blew apart and I need to change it out. Do I have to change the transfer case too or will the Dana 300 bolt up to a Jeep …
Teraflex Wrangler JK Leveling Kit Post Installation
The Teraflex Leveling Kit installation took about 3 hours at a casual pace. Our experience working with the JK helped us to get by the little tricky parts and keep moving. After the installation we double checked all the bolts we had contact with during the install including re-torquing the lug nuts after 50 miles.
Teraflex Wrangler JK Leveling Kit Installation – Part 3
Part 3: Rear Installation Installation of this kit is pretty simple and only requires basic tools, a good jack, and good jack stands. Safety is top priority, make sure the Jeep is secured before working underneath. Raise the rear of the Jeep and support the Jeep with jack stands placed under the frame rails just …
Teraflex Wrangler JK Leveling Kit Installation – Part 2
Part 2: Front Installation Installation of this kit is pretty simple and only requires basic tools, a good jack, and good jack stands. Safety is top priority, make sure the Jeep is secured before working underneath. Raise the front of the Jeep and support the Jeep by jack stands under the frame rails behind the …
2012 Wrangler Model Changes and Compatibility
The new engine and transmission combinations seem to have brought about some changes in the Jeep that may affect installation of aftermarket accessories. We have put together a list of known changes and possible solutions.
Wrangler JK Handling Problems after Lift
QUESTION: I recently purchased a 2008 4dr JK Wrangler from an out-of-state dealer. It has a 4″ lift with 35″ tires and KMC bead locker wheels. I have noticed that on long sweeping left turns the Jeep very often feels like you’ve gone over a patch of ice and it is unable to hold a …