Reviews and Products - Shrockworks Jeep JK Front Winch Bumper - Mid Width - Powered by ReviewPost


Reviews Views
0 17816
Recommended By Average Price Average Rating
No recommendations None indicated None indicated
Shrockworks_d_601.jpg


supersize

supersize

supersize

Description: The new Shrockworks Mid-Width Front Bumper for the Jeep JK is a slightly larger version of the "stubby". If you are looking for something a bit wider and would like to retain the factory fog lights, this bumper is for you!


The new mid-width is still compact enough to stay out of the way offroad and allow great approach angles while providing a little extra width and mounting locations for the factory fog lights. Despite the larger size, this new bumper blends in nicely with the smooth lines of the new JK Wrangler. It looks TOUGH without looking like an aftermarket afterthought.


- The main body of the bumper is constructed of high strength 3/16" steel plate, laser cut, CNC formed and meticulously welded and finished by skilled craftsman in the USA!.


Compare our standard features to the competition!


- A removable 3/16" steel SKID PLATE that wraps underneath is included! This skid plate wraps far enough under that it will also protect the sway bar disconnect motor found on all JK Rubicon's and some other 2007 + Jeep JK 's. Since the skid is removable, it can be easily replaced if damaged. That's not likely to happen though. The skid is formed specifically for strength. The edges are bent up on the sides. It has welded gussets on the back side, and it's made from the same high-tensile 3/16" steel plate as the bumper itself. This is probably the most damage-prone area on a Jeep. Many bumpers have a flimsy flat piece of flat plate in this area. One good hit there, and the whole bumper is bent & toast. Others charge you extra for a skid plate. We consider it a necessity and include it as a std. feature.


- Massive 1" thick plate steel Shackle / Recovery points are included as a std feature. These tabs are are welded front & back, and they are designed in such a way that even if the welds were to fail, the recovery points themselves are still held in the bumper (see CAD pic on right).


- Winch mount plate included. There is nothing else needed to mount a winch. Just bolt it on and go! Accommodates most winches up to 9500 lbs, including hard to fit winches like the new Warn Powerplant HP winch.


- Lighting options. Built-in light tabs on top of the bumper for aftermarket driving or fog lights. Recessed light mounts in the front face of the bumper accept the factory fog light or PIAA 510 4" lights, either the driving or fog version. If you already have the stock lights, select none in the options. If you don't have the stock fog lights, we recommend buying the PIAA lights. They are much higher quality that the stock fog lights and cheaper too.


- Optional winch opening cover plate for a clean look w/o a winch. This plate will also accommodate an additional set of off-road lights on top of the bumper. Your license plate will cover the fairlead opening.


- Available with your choice of no top tubing or a low profile winch height hoop.

93794-lg.jpg
<<
Rustys_ejs2007_03.jpg
<
DurangoJKGrizzly.jpg
·
Shrockworks_d_601.jpg
>
d_565.jpg
>>


 
arbJKStubbyBumper1.png
ARB Stubby Front Bumper for Jeep Wrangler JK
JFStaff


Powered by: ReviewPost PHP
Copyright 2006 All Enthusiast, Inc.