|
Reviews
|
Views
|
|
0
|
10341
|
|
Recommended By
|
Average Price
|
Average Rating
|
|
No recommendations
|
None indicated
|
None indicated
|
|
|
|
|
|
|
|
Description:
|
Smooth, Clean and Brutally Strong. The Shrockworks "Stubby" front bumper for the Jeep JK packs a lot of features and functionality into a compact package that allows maximum approach angle off-road and blends in naturally with the lines of the new JK Wrangler.
- Constructed of high strength 3/16" steel plate, laser cut, CNC formed and meticulously welded and finished by skilled craftsman in the USA!.
Standard and Optional Features
- STANDARD: A removable SKID PLATE that wraps underneath is included as a std feature! This skid plate wraps far enough under that it will also protect the sway bar disconnect motor found on all JK Rubicon's and some other 2007+ Jeep JK's. Since the skid is removable, it can be easily replaced if damaged. That's not likely to happen though. The skid is formed specifically for strength. The edges are bent up on the sides. It has welded gussets on the back side, and it's made from the same high-tensile 3/16" steel plate as the bumper itself. This is probably the most damage-prone area on a Jeep. Many bumpers have a flimsy flat piece of flat plate in this area. One good hit there, and the whole bumper is bent & toast. Others charge you extra for a skid plate. We consider it a necessity and include it as a std. feature.
- STANDARD: Shackle / Recovery points are included as a std feature. They are made from massive 1" thick plate steel. They are welded front & back, and they are designed in such a way that even if the welds were to fail, the recovery points themselves are still held in the bumper.
- STANDARD: There is nothing else needed to mount a winch. Just bolt it on and go! Accommodates most winches up to 9500 lbs, including hard to fit winches like the new Warn Powerplant HP winch.
- Built-in light tabs for aftermarket driving or fog lights.
- Optional winch opening cover for a clean look w/o a winch. This plate will also accommodate an additional set of off-road lights on top of the bumper. A license plate will cover the fairlead opening.
- Three versions are available: no top tubing, a low profile winch height hoop and one with a grill hoop.
- Finish options are: bare steel, semi-gloss black powder coat, and a semi-matte finish textured black powder coat. The text-black has a rough texture. It looks similar to the non-Sahara fender flares.
|
|
|
|
<<
|
<
|
·
|
>
|
|
|
|
Olympic 230 Diamond Back Bumper for JK Wrangler
JFStaff
|
|
|
;)
;)
