Tera Flex JK Wrangler CB Antenna Mount
Looking for a simple and effective way to mount your CB antenna to your JK? Tera Flex makes an inexpensive and simple mount for the JK Wrangler that mounts to the spare tire carrier.
Looking for a simple and effective way to mount your CB antenna to your JK? Tera Flex makes an inexpensive and simple mount for the JK Wrangler that mounts to the spare tire carrier.
Rear Installation The rear installation is even simpler than the front and can be completed in about 30 minutes.
Harry included a set of Mopar JK Rock Bumpers when he ordered his 2008 JK Wrangler Unlimited. After a few months of taking up basement space we decided to install them.
Owners of CJ, YJ, and Wrangler Jeeps know that space is at a premium. Even the four door JK is limited when it comes to dash space. Right Channel Radios, a CB Radio and Antenna Shop, offers two Jeep CB Kits assembled for Jeep owners that can make the most of the limited space. The …
Owners of CJ, YJ, and Wrangler Jeeps know that space is at a premium. Even the four door JK is a bit limited. Right Channel Radios, a CB Radio and Antenna Shop, offers two Jeep CB Kits assembled for Jeep owners that can make the most of the limited space.
After a lift on a Wrangler JK these simple bolts set the caster back where it belongs.
Fresh off the installation of a BDS 3″ lift it seemed time to upgrade the jeepfan.com JK’s tires. Now we have been very happy with the Toyo tires and the factory Moab Rubicon wheels but a change would give us a different perspective of how different tires would work.
Lifting a Wrangler JK or TJ will cause the axle to shift to one side due to the increased angle of the front track bar. In the rear adding a drop bracket will correct the angle and place the axle back where it belongs. The front is a different story. The steering drag link and …
Installing the Rear Raise the Jeep and support by jack stands under the frame in front of the rear control arm mounts. We also add additional support for the rear of the Jeep with a high lift jack under the rear bumper. Keep the rear axle supported by a floor jack at close to ride …
Install the front springs with the spacer inside the spring. Using the fasteners provided attach the bump stop spacers to the spring pad.