YJ Frame Dimensions
Have a YJ and need some frame measurements to fabricate or correct something? Check out the specifications below.
Have a YJ and need some frame measurements to fabricate or correct something? Check out the specifications below.
The following images outline the frame dimensions on late model (76-86) CJ vehicles. These images can come in handy when attempting to straighten or customize a Jeep frame. Also see CJ-5 Frame Replacement. CJ-5 Frame The late AMC era CJ-5 had an 83.5″ wheelbase and was available from 1976 until 1983. The small, compact size …
The dealer had 3 JK’s. I had the opportunity to drive the black X. It was equipped with the standard equipment plus an automatic transmission, upgraded radio, power windows, and power locks with keyless entry.
Jeep Steering Alignment 101 – What do these terms mean?
Installing Camber Adjustment Shims.
Installing Castor/Camber Adjusting Upper Ball Joint Sleeves or “Camber Correctors”. Castor/Camber correcting upper ball joint sleeves are installed in place of the original sleeves. The sleeves are tapered, threaded inserts that install in the top of the steering knuckle above the u-joint. These sleeves are used to maintain proper tension on the knuckle ball joints.
What? Everyone has seemed to hear of this but it continues to mystify many. This is a rather simple conversion with drastic results. Upgrading your Jeep’s headlight circuit is a rather straight forward process and can provide that much needed nighttime light without the addition of expensive driving lights or replacement headlights. some information provided …
It was a nice end of summer afternoon and I was running some errands. I went by Kelly Jeep’s lot and out of the corner of my eye I spotted a new Wrangler. I was like “OH MY GOSH, THERE IS NEW WRANGLERS BACK THERE!” Needless to say I almost spun the Liberty around right …
Below is a pictorial guide of Jeep models spanning from 1940 to 2006. The guide includes model, years built, an image, and more.
Installing TJ Flares on a CJ – The right way and ALL the way. Mike wanted a different look. He always liked the CJ’s original look but the larger tires and wide trak axles made everything just kinda stick out too far. A lot of Jeepers install TJ flares for a little more tire coverage …