BDS 3.5″ GlideWrangler Lift in a CJ – Part 4
I picked up the Rancho RS9000 shocks and a set of bump stops from OK Auto. I then proceeded to install them into the Jeep. The fronts (a) are very easy and the rear ones are almost the same, I also reconnected the swaybar disconnects (b). Read more
BDS 3.5″ GlideWrangler Lift in a CJ – Part 3
I backed the Jeep into my humble little garage and removed the rear wheels to get started on the back. The rear is considerably easier than the front and took about 1/4 of the time. The old springs and shackle mounts were removed (a). The rear springs were installed along with the new upper shackle mounts (b & c). The axle was then placed on the springs and the u-bolts and u-bolt plates were installed (d). Read more
BDS 3.5″ GlideWrangler Lift in a CJ – Part 2
We are ready to get into the nitty-gritty on this project, Ralph from www.offroaders.com came to lend a hand, many thanks to him. As with any project make sure you are comfortable with doing this kind of work and double check everything after you are finished. Some details of this project may not have been included. Read more
BDS 3.5″ GlideRide Wrangler Lift in a CJ
Installation of a BDS 3.5″ Lift Kit with RS9000 shocks and Rock Equipment accessories on a CJ-5. Read more
Technical & Information
Offroading & Events
Projects & Installs
Readers Jeeps
